Info

The Ventus-15sp is a powerful, compact and easy to transport single 15" self-powered Subwoofer.

The used power amplifier and DSP electronics of the latest generation provide highest sound quality and high performance.

The high-quality Class-D power amplifier module with wide-range switching power supply is designed with 2 channels in order to be able to feed a top section.

CH-1 has 1,500 W/ 8 Ω, CH-2 has 400 W/ 8Ω and 800 W/ 4 Ω.

With the Ventus self-powered subwoofers, a powerful, quick and easy to set up Plug&Play PA can be realized.

The integrated DSP of the latest generation has over 80 preset memories, which are managed by software. With one button 5 presets can be selected manually. By means of the remote control software the experienced user has full access to all setting possibilities. Two Ethernet sockets allow daisy-chain cabling of larger remote networks and save cabling time.

The Ventus-15sp sets new standards for sound, performance and quality in its price range!

The long excursion 15" chassis has a high power handling 4" voice coil. A low moving mass ensures an extremely precise and at the same time deep, dry bass reproduction. The large reflex port and high mechanical excursion give the bass excellent dynamics and effectiveness.

A removable wheel board can be attached to the front for easy transport. A protective cover protects the surface and ensures value retention.

The two large handles can be grasped from all sides, are in the centre of gravity and ensure comfortable handling.

Rubber feet and stacking troughs guarantee a secure stand without slipping. An M20 flange for distance rods is integrated.

Operation

  • Plug&Play as self-powered speaker and as amplifier for tops.

Technical Data

Drivers
1 x 15" Woofer with 4" voice coil

Lower cut-off frequency
34 Hz (- 10 dB)
43 Hz (- 3 dB)

Power output
CH1: 1.500 W/ 8 Ω
CH2: 400 W/ 8 Ω, 800 W/ 4 Ω

Impedance
8 Ω

Powerhandling (AES / program / peak)
800 W / 1.600 W / 3.200 W

Sensitivity 1 W/1 m (AES / program / peak)
97 dB SPL / 100 dB SPL / 103 dB SPL

Sound pressure at (AES / program / peak)
127 dB SPL / 130 dB SPL / 133 dB SPL

Connection
2 x Neutrik NL4 IN/OUT 2+/2- (4-pole looped-through)

Finish
Polyurea coating in RAL 9005

Dimensions (H × W × D)
438 × 580 × 540 mm

Accessoires

Transport cover for Ventus-15 (sp)

Item no. 5T1151000

Transport cover for Ventus-15 (sp) made of stable Codura fabric with padding. All handles are cut out.

Detachable wheelboard for Ventus-15 (sp)

Item no. 5T1154000

Detachable wheelboard to mount on Ventus-15 (sp). 15 mm wood, 2 x butterfly locks, 1 x handle, 4 x Blue Wheels.

Telescopic rod

Item no. 999921368

Telescopic rod with expanding mandrel system for play-free seating in the tripod base. Height: 110 to 180 cm. Max. load capacity: 35 kg.

Carrying bag for 2 x telescopic distance rods

Item no. 999921000

Extremely robust, padded carrying bag for two telescopic distance rods without crank, with two carrying straps and zippers. The padded partition wall protects the two distance rods from scratching. The floor and all load points are reinforced. Made of easy-care water-repellent nylon.

Distance rod with crank

Item no. 999921340

Distance rod for cranking with expanding mandrel system which provides a tight and firm fit for the speaker. Height: 92 - 152 cm. Max. load capacity: 50 kg.

Carrying bag for 2 x speaker stand/ rod with crank

Item no. 999920000

Carrying bag for two speaker stands or distance rods with crank. Two inside compartments with zipper and sturdy handles. Material waterproof nylon.

Cable Clip for speaker stand/ rod

Item no. 999935000

The cable clip made of robust, durable ABS plastic is specially designed for speaker stands and distance rods with 35 - 36 mm tube. It adheres firmly to the tube and holds the cables securely and neatly in the 24 x 16 mm guide accessible from the outside.

speakON cable 0.5/1/3/6/10/15/20/30 m

Item no. 80440XXX1

Speaker cables in various lengths with Neutrik plug NL4FX. 4 x 4 sq mm, each wire 224 x 0.15 copper, diameter 11 mm, weight 273 g / m. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance.

speakON adapter

Item no. 999654669

Adapter to connect two speaker cables.

XLR signal cable 0,5/3/6/10/15/20/30/50 m

Item no. 80205XXX5

XLR signal cable in different lengths with Neutrik connectors NC3FXX-B and B-NC3MXX, black housing and gold-plated contacts. Large wire diameter of 2 x 0,5 sq mm with 28 x 0.15 sq mm copper per core, 100 % shielding due to dense copper spiral turner and metallised fleece.

powerCON TRUE1 3/6/10/15/20/30/50 m

Item no. 80325XXX3

Titanex H07RN-F 3 x 2.5 sq mm cable in various lengths.The special jacket surface assumes little dirt and is easy to clean. Even cold nor flexible. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance. With Neutrik powerCON TRUE1 - NAC3FX-W and NAC3MX-W device connectors.

powerCON TRUE1-Schuko 3/6/10/15/20/30/50 m

Item no. 80325XXX2

Titanex H07RN-F 3 x 2.5 sq mm cable in various lengths.The special jacket surface assumes little dirt and is easy to clean. Even cold nor flexible. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance. With Neutrik powerCON TRUE1 - NAC3FX-W and Schuko device connectors.