The Ventus-12sp is a powerful, compact and easy to transport single 12" self-powered Subwoofer.
The used power amplifier and DSP electronics of the latest generation provide highest sound quality and high performance.
The high-quality Class-D power amplifier module with wide-range switching power supply is designed with 2 channels in order to be able to feed a top section.
CH-1 has 1,500 W/ 8 Ω, CH-2 has 400 W/ 8Ω and 800 W/ 4 Ω.
With the Ventus self-powered subwoofers, a powerful, quick and easy to set up Plug&Play PA can be realized.
The integrated DSP of the latest generation has over 80 preset memories, which are managed by software. With one button 5 presets can be selected manually. By means of the remote control software the experienced user has full access to all setting possibilities. Two Ethernet sockets allow daisy-chain cabling of larger remote networks and save cabling time.
The Ventus-12sp sets new standards for sound, performance and quality in its price range!
The long excursion 12" chassis has a high power handling 4" voice coil. A low moving mass ensures an extremely precise and at the same time deep, dry bass reproduction. The large reflex port and high mechanical excursion give the bass excellent dynamics and effectiveness.
A removable wheel board can be attached to the front for easy transport. A protective cover protects the surface and ensures value retention.
The two large handles can be grasped from all sides, are in the centre of gravity and ensure comfortable handling.
Rubber feet and stacking troughs guarantee a secure stand without slipping. An M20 flange for distance rods is integrated.
- Plug&Play as self-powered speaker and as amplifier for tops.
1 x 12" woofer with 4" voice coil
Lower cut-off frequency
37 Hz (- 10 dB)
46 Hz (+/- 3 dB)
CH1: 1.500 W/ 8 Ω
CH2: 400 W/ 8 Ω, 800 W/ 4 Ω
Powerhandling (AES / program / peak)
800 W / 1.600 W / 3.200 W
Sensitivity 1 W/1 m (AES / program / peak)
96 dB SPL / 100 dB SPL / 103 dB SPL
Sound pressure at (AES / program / peak)
126 dB SPL / 129 dB SPL / 132 dB SPL
2 x Neutrik NL4 IN/OUT 2+/2- (4-pole looped-through)
Polyurea coating in RAL 9005
Dimensions (H × W × D)
368 × 480 × 500 mm
Transport cover for Ventus-12 (sp)
Item no. 5T1121000
Transport cover for Ventus-12 (sp) made of stable Codura fabric with padding. All handles are cut out.
Detachable wheelboard for Ventus-12 (sp)
Item no. 5T1124000
Detachable wheelboard to mount on Ventus-12 (sp). 15 mm wood, 2 x butterfly locks, 1 x handle, 4 x Blue Wheels.
Item no. 999921368
Telescopic rod with expanding mandrel system for play-free seating in the tripod base. Height: 110 to 180 cm. Max. load capacity: 35 kg.
Carrying bag for 2 x telescopic distance rods
Item no. 999921000
Extremely robust, padded carrying bag for two telescopic distance rods without crank, with two carrying straps and zippers. The padded partition wall protects the two distance rods from scratching. The floor and all load points are reinforced. Made of easy-care water-repellent nylon.
Distance rod with crank
Item no. 999921340
Distance rod for cranking with expanding mandrel system which provides a tight and firm fit for the speaker. Height: 92 - 152 cm. Max. load capacity: 50 kg.
Carrying bag for 2 x speaker stand/ rod with crank
Item no. 999920000
Carrying bag for two speaker stands or distance rods with crank. Two inside compartments with zipper and sturdy handles. Material waterproof nylon.
Cable Clip for speaker stand/ rod
Item no. 999935000
The cable clip made of robust, durable ABS plastic is specially designed for speaker stands and distance rods with 35 - 36 mm tube. It adheres firmly to the tube and holds the cables securely and neatly in the 24 x 16 mm guide accessible from the outside.
speakON cable 0.5/1/3/6/10/15/20/30 m
Item no. 80440XXX1
Speaker cables in various lengths with Neutrik plug NL4FX. 4 x 4 sq mm, each wire 224 x 0.15 copper, diameter 11 mm, weight 273 g / m. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance.
Item no. 999654669
Adapter to connect two speaker cables.
XLR signal cable 0,5/3/6/10/15/20/30/50 m
Item no. 80205XXX5
XLR signal cable in different lengths with Neutrik connectors NC3FXX-B and B-NC3MXX, black housing and gold-plated contacts. Large wire diameter of 2 x 0,5 sq mm with 28 x 0.15 sq mm copper per core, 100 % shielding due to dense copper spiral turner and metallised fleece.
powerCON TRUE1 3/6/10/15/20/30/50 m
Item no. 80325XXX3
Titanex H07RN-F 3 x 2.5 sq mm cable in various lengths.The special jacket surface assumes little dirt and is easy to clean. Even cold nor flexible. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance. With Neutrik powerCON TRUE1 - NAC3FX-W and NAC3MX-W device connectors.
powerCON TRUE1-Schuko 3/6/10/15/20/30/50 m
Item no. 80325XXX2
Titanex H07RN-F 3 x 2.5 sq mm cable in various lengths.The special jacket surface assumes little dirt and is easy to clean. Even cold nor flexible. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance. With Neutrik powerCON TRUE1 - NAC3FX-W and Schuko device connectors.